Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Page: 59 / 188

Bosch Video Management System Configuring events and alarms | en 59
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
11.2 Removing a table row
Main window > Alarms
You can only remove a table row that you or another user have added, i.e. you can delete
duplicated events or Compound Event s.
Compound Events are located in the Event Tree under System Devices > Compound Events .
To remove a table row:
1. Select the row.
2. Click .
11.3 Managing resource files
For detailed information see:
– Section 8.4 Managing resource files, page 42 .
11.4 Configuring an event
Main window > Events
To configure an event:
1. In the tree, select an event or event state, for example System Devices > Authentication
> Operator Authentication Rejected .
The corresponding Event Configuration Table is displayed.
2. In the Trigger Alarm - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the alarm is triggered.
Select one of the Recording Schedules or Task Schedule s that you have configured in the
Schedules page.
3. In the Log - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event is logged. Only a logged event is displayed in
the Event List of the Operator Client.
4. In the Script - Script column, click a cell and select an appropriate Command Script .
5. In the Script - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event triggers the start of the Command Script.
6. In the Minimum Event Time column, click a cell and type the number of milliseconds as
the minimum time between these events. Use this setting to prevent a switching sensor
from generating a large number of events.
11.5 Duplicating an event
Main window > Events
You can duplicate an event to trigger different alarm s for a particular event.
To duplicate an event:
1. In the tree, select an event condition.
The corresponding Event Configuration Table is displayed.
2. Select a table row.