Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Page: 86 / 188

86 en | Devices page Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
Allows you to assign detected encoders to an NVR. This is required to store the video data of
the encoder on an NVR and to manage event s of their assigned devices.
Unassigned devices do not appear in the Device Tree .
Unassigned Encoders
Displays the unassigned encoders that were detected.
Assigned Encoders and NVRs
Displays assigned encoders and NVRs. NVRs are automatically assigned when they are
detected. For assigning encoders you must drag them from the Unassigned Encoders list to
an NVR.
Decoders
Displays the detected decoders.
Configure Devices
Click to display the IP Device Configuration dialog box.
Next >
Click to display the next page of this dialog box. If the device names differ from their names in
Bosch Video Management System, a dialog box is displayed for changing the names as
required.
Finish
Click to confirm the scan results and the assignments of encoders and close the dialog box.
17.3 Bosch VMS Scan Wizard
Main window > Devices > VRM & iSCSI Devices Scan
Allows you to detect the following devices and assign them to Bosch Video Management
System:
– VRMs , iSCSI storage devices (you can assign encoders during the scan process)
– Live only and local storage encoders
– VIDOS NVRs
Assign
Click to assign selected devices to their parent device. For example you assign encoders to a
VRM.
Assign All
Click to assign all scanned devices to their parent device.
Remove
Click to remove a device from its parent device. The recordings of a removed device are not
removed. You can find them when you add this device again.
NOTICE!
Only devices in the local subnet are detected automatically. If a device is located in another
subnet, add it manually to the Device Tree. To perform this, right-click the required node (for
example an NVR), click Add Encoder , type the IP address of the device, click the Network tab
and enter the subnet mask of the device.