Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 32

Page: 32 / 188

en | Configuring devices

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

6.21

Adding a VRM device with iSCSI storage

Main window >

Devices

In your network, you need a

VRM

service running on a computer, and an

iSCSI

device.

With Operator Client you cannot display VRM devices.

To add a VRM device and an iSCSI device:

Right-click

and click

Scan VRM Devices

The

Bosch VMS Scan Wizard

is displayed.

Click to check the IP address of the desired VRM computer. You can select multiple

computers.

Click

Next >>

The next step of the wizard is displayed.

Click

Add iSCSI device

The

Add iSCSI Device

dialog box is displayed.

Type a desired display name, the IP address of an iSCSI device, and the device type and

click

The device is added to the scan wizard dialog box.

Assign the iSCSI device to the VRM.

If required assign multiple iSCSI devices.

Click

Next >>

The next step of the wizard is displayed.

Assign the desired IP devices to the VRM.

Click

Next >>

The next step of the wizard is displayed.

10. Type the user names and passwords of the devices in the table.

11. Click

Test all

to log on to all devices.

If required, select the desired devices and click

Test selected

to log on to these devices.

In the

Status

column, the successful logons are indicated with

The failed logons are indicated with

12. Click

Finish

The iSCSI device is connected to the VRM. Video streams from an IP device assigned to

this VRM are recorded on the assigned iSCSI device.

If required, a dialog box is displayed for changing the device names of the detected IP

devices to be used for display. Bosch Video Management System names the devices with

default names. If desired, you can use the existing names of the devices.

CAUTION!

When you add an iSCSI device with no targets and LUNs configured, start a default

configuration and add the

IQN

of each encoder to this iSCSI device.

When you add an iSCSI device with targets and LUNs pre-configured, add the IQN of each

encoder to this iSCSI device.

See

Section 6.22 Configuring an iSCSI device, page 33

for details.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands