Bosch LTC 1311/20 FlexiDome I Configuration Manual Download Page 90

Page: 90 / 188

en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

17.8.3

Camera Storage page

Main window >

Devices

> Expand

Camera Storage

tab

Allows you to configure the backup settings for video data for assigned cameras.

Name

Displays the camera name as configured on the

Cameras and Recording

page.

Location

Displays the location of the camera as configured on the

Maps and Structure

page.

Min Time [days]

Click a cell to edit the minimum number of days that video data from this camera is to be

retained. Recordings younger than this number of days are not deleted automatically.

Max Time [days]

Click a cell to edit the maximum number of days that video data from this camera is to be

retained. All recordings including protected recordings older than this number of days are

deleted automatically.

Keep Protected Recordings

Select the check box to ensure that protected recordings are not deleted when their time

stamp exceeds the maximum storage time. If this option was configured for a camera that has

been removed from the Device Tree afterwards, all recordings including protected recordings

of this camera are deleted after exceeding the maximum storage time.

Export on

Select the computer where videos are exported for backup. You can select the Central Server

computer or this

NVR

computer. Exporting on the NVR is faster because exporting on the

Central Server creates an additional network load.

Path

Select the path for the backup.

Schedule

Select the schedule for the backup.

Time [h]

Enter the number of hours into the past beginning with the scheduled time that you want to

back up.

CAUTION!

Select the maximum number of days according to the available disk space or enlarge the disk

space. Ensure that maximum 85% of the available disk space is used.

CAUTION!

Recordings with a time stamp lying between minimum and maximum time except for

protected recordings are automatically deleted when disk space is low.

CAUTION!

If you select the

Primary NVR

computer, video data that has been recorded on a

Failover NVR

during a downtime of the Primary NVR is not backed up.

Backup of video data uses as much network bandwidth as possible. Ensure that enough

network performance is available.

Summary of Contents for LTC 1311/20 FlexiDome I





























































































































































































Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands

Bosch LTC 1311/20 FlexiDome I, Configuration Manual

Search results

Summary of Contents for LTC 1311/20 FlexiDome I

Reviews:

Related manuals for LTC 1311/20 FlexiDome I

Brands by name

Popular brands