Voltage at
input pin
State of adjustment
0 – Idle
1– Adjustment
triggered
2 – Adjustment lock
time
Drag channels
on
Measurement
Sheet
Notice
A display alarm can be linked to the trigger channel to indicate
that the trigger has been detected.
Online calibration of multipoint adjustment
channels
Example: measurement of wheel force
▪ Physical property ‘wheel force’ not directly measureable
▪ Load transfer through suspension kinematics
▪ Physical value at sensor position defined by vehicle
▪ Curve definition by online adjustment at vehicle
Force at wheel
Force at sensor
1. Create a multipoint adjustment measurement channel. To create a multipoint
channel, see chapter ‘
Configuring a multipoint adjustment [
}
78]
’.
2. Download the configuration on the DDU 8. To connect the DDU 8 to Race‐
Con, see chapter ‘
Connecting the Unit to RaceCon [
}
18]
’.
3. Click on the desired channel in the DDU 8 Project Tree.
4. Double‐click on a measurement channel in the Data Area to open the online
view.
11.5
Online Measurement | 11
Bosch Motorsport
DDU 8 Manual
101 / 160