Drag +
drop
A ‘Group Adjustment Channel Wizard’ opens.
Check the box to activate
the internal DDU 8 pullup-
resistor and set the resistor
value
Select the pin to which
the sensor shall be
connected
Notice
If a low-active signal is selected as an input channel, do not
forget to enable the pull-up resistor for the pin. Otherwise the
group adjustment will be triggered periodically.
See chapter ‘
Configuring a generic linear sensor [
}
73]
’ for further information
concerning the pull‐up‐resistor.
3. Click ‘Next’ when done.
The second part of the ‘Computed Sensitivity / Offset Wizard’ opens.
Define minimum time
between two activations
Define minimum active
time to detect activation
Signal is active high
or active low
Enter name to
automatically create a new
measurement sheet
Online Measurement | 11
Bosch Motorsport
DDU 8 Manual
99 / 160