724-746-5500 | blackbox.com
Page 67
Chapter 5: Navigate the Web Configurator
Port Range: Enter the port range you would like to restrict.
Protocol: Select port protocol: Both, TCP, UDP.
Comment: Make comments to record your filtering rule.
Click Apply and the IP address will be added in the list. To delete the restricted source ports, click Select checkbox of the
designated ports and click the Delete Selected button. To delete all the IP addresses in the list, click Delete All.
Destination Port Filtering
Figure 5-56. Destination Port Filtering screen.
You may create and activate a rule that filters a packet based on the destination port from your local network to Internet. Check
“Enable Destination Port Filtering” to activate rule.
Port Range: Enter the port range you would like to restrict.
Protocol: Select port protocol: Both, TCP, UDP.
Comment: Make comments to record your filtering rule.
Click Apply and the IP address will be added in the list. To delete the restricted destination ports, click Select checkbox of the
designated ports and click the Delete Selected button. To delete all the IP addresses in the list, click Delete All.
Port Forwarding
Figure 5-57. Port Forwarding screen.
