Getting Started
22
2.3.6
Function Check
Follow the steps below to do a quick check of the
oscilloscope’s
functionality.
1.
Power on the oscilloscope. Press "Default Setup" to show the result of the self-check.
–
The probe default attenuation is 1X.
2.
Set the switch to 1X on the probe and connect the probe to channel 1.
–
To do this align the slot in the probe connector with the key on the CH1 BNC, push to connect, and twist to the
right to lock the probe in place.
–
Connect the probe tip and reference lead to the Probe Comp connectors.
3.
Press the
AUTO
button to show the 1 kHz frequency and about 3V peak to peak square wave.
Figure 2.3
3 Vpp Square Wave
4.
Repeat steps 1 to 3 for the remaining channels.
