Bode Plot
201
20.1.2
Sweep
Touch
Sweep Type
to select the sweep type. There are two types:
Simple
and
Variable Level
.
20.1.3
Simple Sweep
Figure 20.4
Simple Sweep
A.
Set the sweep type to simple. There are two types: Simple and variable level.
B.
Set the sweep frequency. The frequency mode can be linear or decade. When it is set to linear, the corresponding
center frequency and span frequency need to be set. When it is set to decade, the corresponding start frequency and
stop frequency need to be set.
C.
Set the number of sweep points. The larger the number of points, the higher the sweep resolution.
D.
Set the amplitude of sweep signal.
E.
Set the offset of the sweep signal.
F.
Set the signal amplitude unit. When it is set to dB, reference level and load need to be set.
G.
Set the load.
