BK Precision 2560B Series, User Manual

Page: 76 / 224

Trigger
76
9.8 Zone Trigger
The 2560B Series includes a zone trigger to help isolate elusive glitches. There are
two user-defined areas: Zone1 and Zone2. The property of each zone as
intersect or
not intersect as an additional condition to further isolate an event. Intersect only
includes events that occur within the zone. Not intersect includes all events that
occur outside of the zone.
To enable and the trigger zone function:
1. Press the Setup key or use the touchscreen controls to enter the Trigger Menu .
2. Use the touchscreen to select Zone .
3. The menu shown in figure 9.32 will appear.
4. Press the Zone option to toggle the zone function on or off.
9.8.1 Creating and Moving Zones
The zones can be created and moved by gestures or by setting the zone settings in the
Zone Setting Menu.
The color of the zone’s outline is consistent with the color of the
specified source.(Channel 1 = Yellow, etc.)
Gestures
When the zone trigger is turned on , touch-and-hold on any position within the wave-
form area and draw a rectangular box, as shown in figure
9.31 .
When the finger moves out of the screen, a menu pops up for selecting the zone and
setting the zone properties:
Figure 9.31 Zone Gesture
Figure 9.32
Zone Trigger Menu