Serial Trigger and Decode
120
Figure 10.55
SENT Message
The serial message frame contains 21 bits of payload data. Two different configurations can be chosen determined by
the configuration bit (serial data bit #3, serial communication nibble No. 8):
Enhanced Serial Message with 4bits ID
: 16-bit data and 4-bit message ID, the configuration bit is 1.
Figure 10.56
SENT Message2
Enhanced Serial Message with 8bits ID
: 12-bit data and 8-bit message ID, the configuration bit is 0.
When the trigger condition is set to
Slow Channel
:
–
ID can be selected in the hexadecimal range of 0x0 to 0xF (short serial / enhanced serial with 4 bits IDor 0x00
to 0xFFenhanced serial with 8 bits ID. If it is selected as "0xXX", the ID is ignored.
–
Compare Type can be specified as Equal, Not Equal, Less than, Less or Equal, Greater than, Greater or Equal,
in Range of, out of Range.
–
Data can be selected in the hexadecimal range of 0x00 to 0xFF (short serial or 0x0000 to 0xFFFFenhanced
serial with 4 bits IDor 0x000 to 0Xfff(enhanced serial with 8 bits ID). If it is selected as "0xXX", the data is
ignored.
