Vertical Control
43
7.4.4
Label
Customize the label text, of the selected source. The source can be C1 - C4, F1 or F2, and RefA - RefD.
The length of the label is limited to 20 characters. The characters beyond this length will not be displayed.
When the
Display
option is set to
“on”,
the label will be displayed on the right side of the channel offset indicator.
To set and enable a
channel’s
label:
1.
Press the desired channel key.
2.
In the
Channel Menu
, use the touchscreen to press the
Label
option.
–
The
Label
submenu will appear.
•
Select a source to assign the label to the specified source.
•
Enable/disable the label using the
Display
option
•
Set the text of the label in the
Label Text
option.
Figure 7.6
Label Submenu
Label On
Label Off
Figure 7.7
Label
7.4.5
Apply To
Common functions such as Trigger, Cursor, Measure, FFT, Search, Mask Test, Counter, and AWG can be quickly applied
to the selected channel using the
Apply To
option. Once a function is specified, it will switch directly to the function
menu and automatically set that channel as the source.
To apply a function:
1.
Press the desired channel key.
2.
In the
Channel Menu
, use the touchscreen to press the
Apply To
option.
–
A drop-down menu will appear listing the available functions.
–
Use the touchscreen to select the desired function.
