Page 42 of 191
800581-2.11 NeurOne System User Manual.doc
8. Connect
Potential equalization cable
to the Main Unit and to the corresponding
wall connector or grounding point. If Battery Pack is in use, the potential
equalization cable is not needed.
9. Connect the Main Unit to
mains power
using the Main Unit power cable.
If video option is not used continue at step 13.
10. Connect XI100DUSB to PC (USB3) using USB3 cable
11. Connect Video camera to XI100DUSB using HDMI cable
12. Connect Video trigger interface cable to Video Trigger unit
13. Connect BNC connector of Video trigger interface cable to NeurOne Trigger
cable, which is connected to NeurOne Main unit. Set the Input pulse trigger type
to Video sync trigger.
14. Connect Audio plug of Video trigger interface cable to MIC input of video camera
15. Optional: connect external microphone to external microphone socket of Video
trigger interface cable
16. Turn on the PC and start NeurOne PC SW. When requested, input your license
information or copy and paste them from license file
17. Create test protocol for the measurement purposes. Set trigger for video if its used.
18. Start the NeurOne Main Unit by pressing the
Power Button
. Turn battery pack
ON and if Tesla amplifier used turn them ON. If video option used turn video
camera and Video Trigger unit on.
19. NeurOne system is now ready for EEG measurement setup and measurements
20. Run test measurement.
