Page 120 of 191
800581-2.11 NeurOne System User Manual.doc
Information of connected SyncBox
When mouse pointer is placed on the SyncBox icon the tooltip shows clock source in
use, actual clock frequency, target clock frequency and firmware version.
Information of the NeurOne PC
When mouse pointer is placed on the PC icon the tooltip shows name of the PC and IP
address.
Global settings
Pressing
opens global setting window, where:
On the Impedance tab it is possible to set threshold levels for impedance
measurement.
On the SyncBox tab: if Ext. Clock Marker compensation is checked all marker
timestamps are re-adjusted based on the external clock fed to SyncBox. This
sett
ing has no effect if SyncBox isn’t in use. This setting has an effect only for FW
versions 1.3.x.y and older.
NeurOne manager
– table form
Pressing Shift key and
Manager… buttons simultaneously NeurOne manager in
table form is opened. It shows available Main Units and all amplifiers connected
to the Main Units. Serial number, IP Address, Firmware version, Device type and
Battery status is shown if available.
