Biotek MicroFlo select, Operator'S Manual

Page: 40 / 130

22 | Installation
BioTek Instruments, Inc.
Repacking and shipping the MicroFlo
If you need to ship the MicroFlo Select Microplate Dispenser to BioTek for service or
repair, be sure to use the original packing materials. Other forms of commercially available
packaging are not recommended and can
void the warranty.
If the original packing materials have been damaged or lost, contact BioTek Customer
Service for replacement materials.

If the MicroFlo Microplate Dispenser has been exposed
to potentially hazardous material, decontaminate it to
minimize the risk to all who come in contact with the
Dispenser during shipping, handling and servicing.
Decontamination prior to shipping is required by the
U.S. Department of Transportation regulations.
The instrument’s packaging design is subject to change
over time. If the instructions in this section do not
appear to apply to the packaging materials you are
using, please contact BioTek’s Technical Assistance
Center for guidance.
Before shipping the instrument:

Decontaminate the dispenser and its accessories as necessary (find instructions in
Chapter 5).

Obtain a Return Materials Authorization (RMA) number from BioTek TAC.
Mark this number on the outside of the shipping box.

Include a description of what is required of the BioTek Service Department.
Clearly state whether the unit requires calibration, cleaning, periodic maintenance,
warranty work, and/or repair.

Provide BioTek with the name and telephone number of a person who may be
contacted if questions arise.

Insure the instrument for full value.
Repackaging the instrument and its accessories:
Refer to the illustrations on page 25 when repackaging the MicroFlo.