Bionet BM7VET, Operation Manual

Page: 164 / 227

164
BM7Vet Pro User’s Manual
Printer settings
Main menu Sub menu
A. Print Setup
A-1. Printer Setup
Menu Description Available settings
A. Print Setup menu
A-1. Printer Setup
A-1-1. Use Of Printer PRINTER activation menu ON / OFF
A-1-2. Printer Speed Printer speed can select between 25
and 50mm/s. 25 mm/s
50 mm/s
A-1-3. Waveform1 Channel 1 waveform select menu OFF, SPO2, RESP,
ETCO2, IBP1, IBP2,
LEAD I, LEAD II, LEAD
III, aVR, aVL, aVF, V
A-1-4. Waveform2 Channel 2 waveform select menu
A-1-5. Waveform3 Channel 3 waveform select menu
A-1-6. Print From Time In the PRINTER Key menu, press the
printer key to set the output point as
shown below
REAL TIME: Prints the data from the
point where the PRINTER key was
pressed.
DELAY: Prints data before 5seconds
when PRINTER key is pressed
Real Time
Delay (5sec)
A-1-7. Printing Period
Sets when output is printed during
normal output. If you do not manually
stop after pressing the PRINTER KEY,
the waveform will be output for the set
time.
Continue, 10sec,
20sec, 30sec