83
set time <hh:mm:ss>
Description:
This command sets the time of the day (24-hour clock). Note that the time will normally
be set automatically when an HTTP browser first connects to the router.
Example:
Router> set time 20:33:00
set timezone <-12 - +12>
Description:
This command specifies the time zone for the location as an offset from Greenwich Mean
Time (GMT). The time zone is normally set automatically when an HTTP browser first connects to the
router.
Example:
Router> set timezone -8
Time Zone is set to GMT-8 hours.
show config
Description:
A concise summary of the router configuration is displayed.
Example:
Router> show config
IP Addr: 192.168.168.230
NetMask: 255.255.255.0
IP RIP: D
Port 1: ISDN PPP ENABLED
Europe (ETSI)
Ewan : EWAN
ENABLED
Speed = 10 Mb
show connection log
Description:
The connection log is displayed by the system. Up to 128 entries are maintained by the
router in wraparound fashion. For a complete description of these entries, refer the
User Guide
for your
system.
Example:
Router> show connection log
1 9/14/99 22:15:38 N/A(N/A): Triggered Detail: IP/TCP 192.168.168.240->63.192.
151.44 1905->139
2 9/14/99 22:16:28 Modem 3(Office): Connected Detail: Outgoing Call to 14085553456
show interface list
Description:
This command displays the status of all interfaces in the system, including their encryption
status.
