41
4. Turn on BIPAC-645.
5. Press Ctrl +C while the message “Loading Firmware” shows up.
6. Then it will show “Clearing System Configuration” once the system is ready.
7. Therefore, it will recover the default password while the router reboot automatically.
z
Why does BIPAC-645 connect with ISP sometimes automatically?
Answer.
BIPAC-645 will build up connected function once LAN’s PC has any packet need to send. This
function calls Dial on Demand.
z
Why didn’t BIPAC-645 offline automatically even my Idle Time exceeded?
Answer.
There are several reasons for in-completed offline:
1. The setting Idle time is greater than the confirmed connection packet from ISP.
2. If there is any packet flow into the LAN, Idle Time will always recalculated.
3. LAN’s PC is running Program for the Network, And Program send the packet to the Internet.
You could use the window in Show Profile Status to monitor the packet quantity in Network.
z
Why can’t I connect successfully while I use Remote Dial-in?
Answer.
Please be sure both Remote User’s Username and password are correct, and keep the setting
information identically at two sides of Router. The best way is setting the
BIPAC-645
in
MultiPPP.
