69
Fragments Dropped after Timeout
0
Fragments Dropped (Duplicates/No Space
0
show pat
Description:
This command displays the static configuration entries in the Network Address Translation
Table.
Example:
Router> show pat
Public
Port Private
IP
Private
Port
Number
Address
Number
--------------------------------------------------------
Default
192.168.168.121
123 192.168.168.120
234
26
192.168.168.120
26
Router>
show tcp statistics
Example:
Router> show tcp statistics
Received
Sent
-----------------------------------------------------
Total
Packets
0
0
show udp statistics
Example:
Router> show udp statistics
Received
Delivered
----------------------------------------------------------
Total
datagrams
19368
5424
Datagrams with checksum error
0
Datagrams with incorrect length
0
Datagrams dropped due to buffer full
1133
Datagrams with dest. port unreachable
0
Port Commands
Port related commands allow configuration of a port, the protocol running on the port, and the
corresponding protocol parameters. In addition, commands are available for clearing statistical counters,
enabling/disabling ports, and displaying port configuration and statistics.
There are two modes of operation when setting a port: (1) the advanced mode, which causes detailed
prompts to be displayed, allowing the user to configure all parameters, (2) the express mode, which
assumes default values for most parameters, and therefore causes a minimal number of prompts to show.
The system will come up in the express mode. Typing a Ctrl-E (^E, i.e., pressing both the E and control
key together) will cause the mode to be toggled.
