57
Router> show dhcp
Admin Status: Enable
Default Lease:
10 hours
Network address: 192.168.168.0
Netmask:
255.255.255.0
Default gateway: 192.168.168.230
Primary DNS: 199.191.129.139 Secondary DNS:
199.191.144.75
Primary WINS:
63.221.98.5
Secondary WINS:63.221.98.7
Node Type
h-node
IP-Address
Mac-Addr
Lease-Expires
Entry
Type
-----------------------------------------------------------------
192.168.168.134 00400535db4f
06-15-99
14:24:5 Static
192.168.168.254 222222222222
06-15-99
16:43:7 Dynamic
show dhcp table
Description
: This command displays the entries currently configured in the Static DHCP Assignment
Table
Example
:
Router> show dhcp table
Static DHCP Assignments
Name
IP-Address
Mac-Address
----------------------------------------------------------------
daniel
192.168.168.134
00-40-05-35-DB-4F
show range
Description:
This command displays the upper and lower bound addresses currently being used for the
dynamic assignment of private IP addresses to DHCP clients and dial in users. (See “
set range”
, above)
Example
:
Router> show range
IP address assignment range: 192.168.168.1 – 192.168.168.254
Diagnostic Commands
connect profile <Profile Name>
Description:
For switched profiles, this command activates the profile as if a trigger occurred. This
command has no effect on leased line profiles.
disable trace
Description:
This command disables the debug trace messages.
disconnect profile <Profile Name>
Description:
For active switched profiles, this command terminates the connection as if an idle timeout
occurred. This command has no effect on leased line profiles.
