27
Step 5:
Enter the following information
:
Profile Name:
a name associated with this profile.
Call Direction:
if the remote site will be dialing in, select
Incoming
. If the BIPAC-645 will dial out to
the remote site, select
Outgoing
. Select
Both
if either side can initiate the connection. The default setting
is
Both
.
Call Back:
if Call Back is enabled (
Yes
is selected), it checks the Remote System Name and Remote
Password. If a call is received and authentication succeeds, it disconnects the incoming call, and calls the
number in the Call Back field. If Call Back is not enabled (No), the Call Back Number field will not
display. If the Call Direction is Outgoing only, Call Back options will not display.
Remote Phone Number:
My Account Name:
My Account Password:
Remote Account Name:
Remote Account Password:
Step 6:
If you selected
Outgoing
or
Both
as your
Call Direction
, click
APPLY and TEST
, or select
ADVANCED
for more options. You must still click
Apply and Test
even if the other end of the
connection has not been configured. In this case the test will fail, but that can be considered normal.
Make sure the remote site is configured with the same values you specify in My
Account Name and My Account Password.
