Billion BIPAC-645 User Manual Download

Page: 6 / 82

2.3 The rear ports

Power
(jack)

Connect the supplied power adapter to this jack

Console
(port)

Connect the supplied RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).

ISDN So
(RJ-45 connector)

Connect an RJ-45 cable to this port when connecting to the ISDN.

LAN 1-4
(RJ-45 connector)

Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.

WAN
(RJ-45 connector)

Connect an UTP Ethernet cable to this port

when connecting to

the Internet or making other WAN connections

2.4 Cabling

Now you should be ready to connect your BIPAC-645 on your LAN and WAN or ISDN jacks. Follow

these steps to install:

•

Connect the router from EWAN port to an ADSL/cable modem, or attach the ISDN line to the ISDN
connector (S/T interface).

•

Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port Hub first
and then uplink (cascade) port on the hub must be connected to LAN port.

•

Plug the power adapter into a wall outlet and into the AC connector on the back of BIPAC-645.

Summary of Contents for BIPAC-645



















































































Search results

Summary of Contents for BIPAC-645

Reviews:

Related manuals for BIPAC-645

Brands by name

Popular brands

Billion BIPAC-645, User Manual

Search results

Summary of Contents for BIPAC-645

Reviews:

Related manuals for BIPAC-645

Brands by name

Popular brands