80
Router> download config router.cfg from 205.51.23.12
download firmware
Description
: This command causes the product firmware to be downloaded to the system from a directly
attached PC running the terminal emulation software (one with file download capability). Note that this
command cannot be used from a telnet session. This is an alternative to downloading the software using
the HTTP browser.
Since the router will reset after this operation is complete, the system will first prompt for the
confirmation. The system will ask the user to select the download speed. The user may then change the
terminal baud rate for a faster download and press enter to continue (some terminal emulators require a
“disconnect” followed by a “connect” in order for the changed parameters to take effect). Select the
Z-modem protocol for use in downloading the firmware. The user then selects (opens) the firmware file
for actual downloading.
help
(This list may differ depending upon the router model):
Router> help
Commands are categorized as follows:
(1) Bridging
(2) Compression
(3) Diagnostics
(4)
Filtering
(5)
IP
(6)
Port
(7) Profile
(8) Security
(9) SNMP
(10) Statistics (11) System
Please enter a selection number [1..11] for more detail information: 1
disable bridging <ifName>
disable learning
enable bridging <ifName>
enable learning
show bridging
show learning
show learning <ifName>
Please enter a selection number [1..11] for more detail information:
logout
Description:
This command logs the user out of the system.
reset system
Description:
This command allows the user to reset the system. A confirmation will be displayed.
save config
Description:
This command saves any configuration changes to the flash memory.
In the background, the system is already periodically checking to see if any configuration changes have been made.
