69
ADVANCED USE MANUAL DD700
3.6.14 Setup Menu/Personalizations/Operating modes/Weighing/Management
Weighing CSV
Ability to enable the creation of the data printed in CSV format. These weights can be saved with a
backup on USB stick or HOST. In particular:
Storing-
weighing CSV
NO
Not enabled archive data printed in CSV format
YES
Printed enabled archive data in CSV format. The
printed data store resides in the memory of the
terminal.
USB disk every weighing
Printed enabled archive data in CSV format.
The store printed data may reside in part of USB
HOST and partly in the terminal's memory. Weighs
with USB HOST inserted are automatically stored
on USB HOST whereas with USB HOST not
inserted are stored nela terminal's memory.
N.B. the inclusion of any USB HOST weighed in the
terminal's memory are automatically exported to the
USB HOST.
Save-weighing
(*)(***)
ON OUTPUT
If double weighing allows you to store the sun
output weighs
ALWAYS
If double weighing allows you to store the weighs
both input and output.
Storage on key is highlighted on the display DD700 from a drawing, stylized stick with flashing USB
written in the lower right above the button bar.
This display / operation is more or less visible, it depends on how many weighing operations must be
stored.
The USB-stick design will remain on the display for a short time if the key is left inserted during the
weighing operations, while longer if placed in a second time (with already weighs made).
3.6.15 Setup Menu/Customisation/Outputs/Serial/Com xy
Com xy
string, barcode reader, not used, occupied by printer
string
Extended, Cb, Visual, Idea, Cma, Request with address, Customised,
Printed Data, ModbusRTU, Checkweight (OPT), Number of Pieces (OPT),
CW(OPT), Extraction (OPT), Pfster(OPT), Sasco(OPT), Cardinal(OPT),
Weightronic(OPT), Alsale(OPT), Globalw(OPT), BranLuebbe(OPT) and
Cardinal 748P(OPT).
terminal
number
editor
Only for Cma, on request with address and CW
Response to
remote
commands
YES, NO
Only for CW(**)
