65
ADVANCED USE MANUAL DD700
Peeling Sign: Minus, Plus
With respect to the printer head, it is possible to position the label further ahead
(
Plus
) or further back (
Minus
).
Speed
: 80 (default value). 99 is the maximum settable value.
It must be set according to the instructions in the user manual, in the chapter on
Using the terminal.
Q3
Thermal printer
Roll expulsion
Select
YES
for the automatic ejection of the printing module and therefore facilitate
removal, otherwise select
NO
.
Type of cutting
Determine the cutter mode at the end of each printout.
If you select:
NO
no cut is made;
Complete
a complete cut is made.
Print width: 42,32
It determines a number of 42 or 32 characters per line.
Print manufactures: Yes,NO
Select YES to enable printing out the name of the manufacturer of the instrument,
otherwise select NO.
Neutral
Number of characters per row
It allows you to set how many characters per line
Type terminator
CRLF
CR
LF
PLUS
Thermal printer
Roll expulsion
Select
YES
for the automatic ejection of the printing module and therefore facilitate
removal, otherwise select
NO
ZEBRA
Thermal printer
Print with foil: YES, NO
Label pick-up:
Tear off
Peel-off
Head Resolution (dots/mm) 6, 8
Label Width (mm):
100 (default value and maximum settable value).
It must be set according to the instructions in the user manual, in the chapter on
Using the terminal.
label Length (mm):
70 (default value).
It must be set according to the instructions in the user manual, in the chapter on
Using the terminal
