76
ADVANCED USE MANUAL DD700
Resettings
Product Code, Preset Tares, General Total, Partial Total, Product Code
Total, Generic Code Total, Range Code(**), Range Code Total(**), Client
Total (***)(*), RCP Total (*)(***)Plate Total (*)(***) and Complete Reset
It is possible to reset the contents of the single archives or completely reset the
memory. This operation will lead to the loss of data stored in the terminal.
3.6.23 Setup Menu/Customisation/Custom. Print.-Transm. in memory (**)
This function is used to create a customised
printout (or string) or edit an existing one.
Before customising the printout (or string), it is good practice to print out the list of available general
data with relative
associated numbers. Press
. If the following message appears on the display:
LPT1 by pressing
the list of general data is printed on the defined printer
COM1 by pressing
the list of general data is sent to COM1
COM2 by pressing
the list of general data is sent to COM2
Customise
printout
Weight Printout, General Total, Partial Total, Product Code Total, Generic
Code Total, Range Code Total, Operator Code Total
Enter description of data
By pressing
the list of available general data will be displayed. To enter the description,
proceed as follows:
press
DATA
and enter the number associated to the data that you wish to
select. The number of the data to be selected can be retrieved from the
printout of the list of available general data.
It is also possible to select the required data using the arrows.
Press
twice to confirm the selected data.
Set the following printing attributes:
Vertical expansion
This refers to character height and can be
Single or Double
Horizontal expansion
This refers to character width and can be
Single or Double
Type of character
It can be
Normal, Bold, Italics, Underlined, Reverse
(only available for
Epson LX300+ printer)
