24
ADVANCED USE MANUAL DD700
Setpoint 1
float
41-42
Setpoint 2
Float
43-44
Digital cells (if applicable)
Select cell
int
2000
4)
Select cell data
Int
2001
4)
Single coil (op code=01, 05, 15)
Variable
Type
register
notes
Reset scale
command
0
Self-weighed tare
command
1
Delete tare
command
2
Run MPP weighing operation
Command
20
MPP
End MPP weighing operation
Command
21
MPP
Extraction mode
Start
command
41
stop
command
42
Input/Output
Output 01
Read write
1000
Output 02
Read write
1001
Optional outputs
Read write
1002,,,1005
1006,,,1009
Slot1
Slot2
Discrete input (op code=02)
Variable
Type
register
notes
Input/Output
Input 01
Read-only
1000
Input 02
Read-only
1001
Optional inputs
Read-only
1002,,,1005
1006,,,1009
Slot1
Slot2
The whole variables can be programmed using configuration parameters such as big/little endian
The Long variables can be programmed using configuration parameters such as big/little endian
The float variables can be programmed using configuration parameters such as big/little endian and
with exchanged registers
It is not possible to run partial reading or writing operations on multi register variables, for ex. float.
Command-type coils run the described operation in both writing and reading; in the latter case, a
value is returned that indicates the return condition of its execution ( 1=TRUE, 0=FALSE)
