WWW.BIGASSFANS.COM ©2013 DELTA T LLC ALL RIGHTS RESERVED
Contents
1 - Introduction
Quick Start Guide
ii
1.1 - ProtoNode Gateway
1
1.2 - Big
Ass
Fans Devices: Method of Configuration
2
1.3 - Big
Ass
Fans Devices and Point Count Available
2
1.4 - BTL Mark: BACnet Testing Laboratory
2
2 - BACnet Setup
2.1 - Record Identification Data
3
2.2 - Configure Modbus RTU COM Settings
3
2.3 - Select Field Protocol
4
2.3.1 - Using the S0–S3 Bank of DIP Switches
4
2.4 - Set MAC Address, Device Instance, Node-ID
5
2.4.1 - Setting the MAC Address
5
2.4.2 - Setting the Device Instance (Node-ID)
5
2.4.2.1 - Set Node_Off
6
2.4.3 - Setting the Device Node-ID
6
2.5 - Set Baud Rate
7
2.5.1 - Setting the Serial Baud Rate
7
2.5.1.1 - Baud Rate DIP Switch Selection
7
3 - Interfacing ProtoNode
to Devices
3.1 - Connection Ports
8
3.2 - Wiring Connections
9
3.2.1 - Biasing the Modbus RS-485 Network
9
3.2.2 - End-of-Line Termination Switch for the Modbus RS-485 Port on the ProtoNode
10
3.3 - Wiring ProtoNode RER to RS-485 Field Protocol
10
3.4 - Wiring Power to the ProtoNode
11
4 - Run Setup for
Connected RS-485
Devices
4.1 - Run Auto Discovery
12
5 - Run Web Configurator
5.1 - Connect PC to ProtoNode via Ethernet Port
13
5.2 - Configure Profiles in ProtoNode’s Web Configurator
13
5.2.1 - Selecting the Device Profiles That Will Be Connected to the ProtoNode
13
6 - Restarting the
Installation
6 - Restarting the Installation
14
7 - Changing the
ProtoNode IP Address
7.1 - Connect PC to ProtoNode via Ethernet Port
15
7.2 - Use the ProtoNode Web GUI to Connect to the ProtoNode
15
7.3 - Set IP Address for BACnet/IP and Modbus TCP
16
8 - CAS BACnet Explorer
8.1 - Downloading the CAS Explorer and Requesting an Activation Key
17
8.2 - CAS BACnet Setup
18
8.2.1 - CAS BACnet MS/TP Setup
18
8.2.2 - CAS BACnet/IP Setup
18
9 - Big Ass Fans
Electrical Installation
Safety Guidelines
19
9.1 - Modbus Wiring Overview
19
9.2 - Cable Types and Distances
20
9.3 - Terminating or EOL Resistors
20
9.4 - Setup and Wiring: Delta E Series VFDs
21
9.5 - Setup and Wiring: Delta M Series VFDs
23
9.6 - Setup and Wiring: Lenze SMVector VFDs
25
9.7 - RS-485 Network Biasing: Lenze SMVector VFDs
27
9.8 - Setup and Wiring: Allen-Bradley
®
PowerFlex
®
VFDs
28
9.9 - Connecting More Than 32 Fans (Daisy Chaining)
30
9.10 - Fire Alarm Interface Methods
31
