WWW.BIGASSFANS.COM ©2013 DELTA T LLC ALL RIGHTS RESERVED
14
5 - Run Web Configurator (cont.)
Figure 21: Web Configurator showing an active Modbus TCP profile selected
After selecting the profile, Modbus node address, and IP address for the Modbus TCP device, click
Add
to add the profile to be
configured.
Figure 22: Web Configurator showing a completed profile added
Figure 23: Web Configurator showing completed profiles added
Continue this process until all the devices have been added.
6 - Restarting the Installation
If you need to start the installation over, remove auto-discovered and/or Web-configured profiles.
1.
Open the PC 's Web browser and enter the default IP address of the ProtoNode (192.168.1.24). This opens the Web Configurator.
2.
Click
Clear Profiles and Restart
.
After the restart is complete, all past profiles that were discovered and/or added via the Web Configurator will be deleted. The unit is
now ready to be reinstalled.
