Berthold DUO XPERT LB 470RID, Operating Manual

Page: 178 / 240

9 Troubleshooting LB 470RID Level
178
56925-1BA2 Rev.02, 05/2021
9.2.1 System
Code Message NAMUR107 Help Text
M101 HW Module F
Hardware electronics module corrupt.
Restart the device. Contact Berthold ser-
vice, if this event occurs repeatedly.
M102 Device dataset F
Failure of the permanent memory. No
parameter set found. Factory reset and /
or restart the device. Contact Berthold
service, if this event occurs repeatedly.
The device possibly must be reset twice.
M103 RAM, Flash or CPU F
Internal hardware failure. Restart the
device. Contact Berthold service, if this
event occurs repeatedly.
M104 WD Reboot M
The Watchdog has caused the device to
restart. Contact Berthold service, if this
event occurs repeatedly. Check, if mas-
sive electromagnetic interferences have
caused this event.
M105 WD Failure F
Watchdog malfunction. Contact
Berthold service, if this event occurs re-
peatedly.
M106 WD Off M
Watchdog is inactive. Activate Watch-
dog
M107
Error in the internal real
time clock
M
Malfunction of the real-time clock.
Check Date and Time. If the event oc-
curs frequently, contact Berthold
Service.
M108 CPU temperature sensor M
The temperature sensor of the device is
defective. Contact Berthold Service. The
hardware is defective and, if necessary,
must be checked and replaced.
M109
Lower temperature limit:
Maintenance required
M
The internal temperature of the device
is close to the lower threshold value
(-20°C) of the permissible operating
temperature.
M110 Temp LL OOS S
The internal temperature of the device
is below the lower limit (-30°C). The cor-
rect function of the device cannot be
guaranteed. It is recommend to have
the device checked by Berthold Service,
even if it seems to work normally.
M111 Temp UL maintenance M
The internal temperature of the device
is close to the upper limit (70°C).
M112 Temp UL OOS S
The internal temperature of the device
is above the upper limit (85°C). The cor-
rect function of the device cannot be
guaranteed. It is recommend to have
the device checked by Berthold Service,
even if it seems to work normally.
M113 Power On Reboot C
The device was restarted, e.g. due to a
power failure.
M114 Software Reboot C The device was restarted by user input.