USER HANDBOOK 1.2 | B-PRIMIS DC/ET PRIME 2110W X C, 2115WUX C
Berghof Automation GmbH | Harretstraße 1 | 72800 Eningen |
www.berghof-automation.com
270011X00_B-PRIMIS_ET-DC-PRIME 2110W-2115W_EN.docx
10
1.6. Intended Use
The device is part of a modular automation system for industrial control applications within the medium
to high performance range. It extends the communications capabilities to include EtherCAT, Profinet,
Modbus and others.
The automation system is designed for use within overvoltage category I (IEC 364 4 443) systems for
controlling and regulating machinery and industrial processes in low-voltage installations in accordance
with the following general parameters:
maximum rated supply voltage of 1,000 V AC (50/60 Hz) or 1,500 V DC
Environment with maximum category 2 pollution (EN 61010-1)
for use up to a maximum altitude of 2,000 m above msn.
for indoor use only in areas not exposed to direct UV radiation
Max. ambient temperature inside and outside the control cabinet in accordance with the technical
data (see “Technical data“)
Qualified project planning and design, proper transport, storage, installation, use and careful mainte-
nance are essential to the flawless and safe operation of the automation system.
The automation system may only be used within the scope of the data and applications specified in this
documentation and associated user manuals.
The automation system must only be used:
as intended
in a technically perfect condition
without any unauthorised modifications
by qualified users
Observe the rules of the employer’s liability insurance association, the technical inspectorate,
and the VDE (Association of German Electrical Engineers) or corresponding country regulations.
The device is intended for installation into a suitable cut-out on industrial machines and systems in in-
door areas.
When installing the device, check that the seal profiles are undamaged.
For operation, refer to the applicable statement of ambient conditions (see "Technical data").
