USER HANDBOOK 1.2 | B-PRIMIS DC/ET PRIME 2110W X C, 2115WUX C
Berghof Automation GmbH | Harretstraße 1 | 72800 Eningen | www.berghof-automation.com
270011X00_B-PRIMIS_ET-DC-PRIME 2110W-2115W_EN.docx
57
4th
Press the “Next” button to skip the following pages until the page with the summary of the exist-
ing settings appears.
5th
Press the "Save” button. The settings will be saved and the device will restart automatically.
After the start-up, the device is in web terminal mode.
The "Configuration” button is accessible for only a brief time after the start-up. After a few seconds,
the device starts its integral browser and blocks the "Configuration” button.
Once this has happened, the only way to access the "Configuration” button is to restart the device
again.
6th
Directly after the start-up, press the "Configuration” button.
7th
Press the “Next” button to skip the IP settings until the page with the Visu URL appears.
8th
Press the “Edit” button.
9th
Input the desired URL and confirm by pressing the "OK" button.
Fig. 42: Setting the Visu URL
10th
Press the “Next” button to skip the following pages until the page with the summary of the exist-
ing settings appears.
11th
Press the "Save” button.
The settings will be saved and the device will restart automatically.
After the restart, the device starts its integral browser and automatically loads the
Visu URL settings.
