3
31
N
ENGINE/VALVES CLEARANCE AND CALIBRATED PADS
CHK
ADJ
M
Measure:
• the calibrated pad
If out of specification Replace it until the correct
clearance is reached.
The thickness of every calibrated pad is shown
in hundredths of millimetre.
10
NOTE:
Take note of the position of each valve lifter
and of each calibrated pad to be able to re-
assemble them correctly.
9
10
1
2
3
DRAIN
INLET
L
M
M
L
28
N
Valves Clearance
Inlet Valve
0.25 ~ 0.30 mm (0.009 ~ 0.011 in)
Drain Valve
0.30 ~ 0.35 mm (0.011 ~ 0.013 in)
rule
example
example
1) Measure the thickness of the pad
5) The obtained value will be the measurement of the new pad
2) Measure the valve clearance
3) Sum the thickness of the pad with the measured valve
clearance
4) Subtract from the obtained sum (pad + clearance)
the value of 0.30 mm (for inlet)
the value of 0.35 mm (for drain)
0.35
0.27
0.22
0.35 + 0.22 =
0.57
0.57 -
0.30
0.37
0.33
0.31
0.37 + 0.31 =
0.68
0.68 -
0.35
HOW TO FIND THE VALUE OF THE NEW PAD
INLET
DRAIN
Summary of Contents for 2009 TREK1130
