Benelli 2009 TREK1130, Workshop Manual

Page: 36 / 582

TECHNICAL DATA
SPEC
2 8
STANDARD LIMIT FRONT BRAKE
Type of brake
with right hand Activation
double disk brake
Recommended liquid DOT 4
16 mm (0.62 in) Pump cylinder internal diameter
Calliper cylinder internal diameter 34 e 30 mm (1.33 e 1.18 in)
320 x 4 mm (12.5 x 0.15 in)
4.0 mm (0.15 in)
Brake disks
Diameter x Thickness
Minimum thickness
0.1 mm (0.004 in) Maximum deformation
4 mm (0.15 in)
Worn brake pads
thickness
STANDARD LIMIT
F
T
with right foot A
F DOT 4
12 mm (0.47 in) Pump cylinder internal diameter
Calliper cylinder internal diameter 32 mm (1.25 in)
240 x 5 mm (9.44 x 0.19 in)
4.5 mm (0.17 in)
Brake disks
STANDARD LIMIT
REAR BRAKE
Type of brake
Activation
Single disk brake
Recommended liquid DOT 4
STANDARD FRONT SUSPENSION
Type of suspension
with tilted stems telescopic fork with spiral
spring/hydraulic shock absorber
Diameter x Thickness
Minimum thickness
0.15 mm (0.006 in)
Maximum deformation
3.5 mm (0.13 in)
Worn brake pads
thickness
262 mm (10.31 in)
150 mm (5.9 in)
175 mm (6.88 in)
Fork excursion
Spring
Free length
Spacer length
9.5 Nm (0.96 Kgf•m)
Flexibility (K1)
0 ~ 120 mm (0 ~ 4.72 in) Spring run (K1)
SAE 7.5 Marzocchi 19
710 cc.
Oil for fork
Recommended oil
Quantity for stem
Level (from end of external tube,
with external tube fully compress-
ed, and without fork spring)
130 mm (0 ~ 5.11 in)
Angle from end run to end run (left)
STANDARD
STEERING WHEEL
Type of bearings for steering wheel
30°
ball bearing
Angle from end run to end run (right) 30°