Benelli 2009 TREK1130, Workshop Manual

Page: 182 / 582

REAR WHEEL AND BRAKE DISK
4 20
3
WARNING
Do not attempt to straighten the axis of the wheel
if it is deformed.
1
4 C Check:
• the wheel bearings
If the rear wheel turns irregularly or is loose
Replace the wheel bearings.
4
B
A
CHAS
REAR WHEEL CONTROL
C Check:
• the wheel axis
Roll the axis of the wheel on a flat surface.
In the presence of deformations Replace.
1
A
C Check:
• the tyre
• the rear wheel
In the presence of damages/wear Replace.
2
M Measure:
• the radial eccentricity of the wheel
• the side eccentricity of the wheel
If the specified limit is exceeded Replace.
3
Radial eccentricity limit of the wheel
0.05 mm (0.0019 in)
Side eccentricity limit of the wheel
0.05 mm (0.0019 in)
C
C
Replace:
• the wheel bearings
5
Remove the bearings from the wheel using
an extractor for bearings.
Install the new wheel bearings inverting the order
of the removal operations.
a
b
D
D
5
B