Benelli 2009 TREK1130, Workshop Manual

Page: 14 / 582

FEATURES
COOLING LIQUID TEMPERATURE INDICATOR
It indicates the cooling liquid temperature in Celsius
degrees (°C).
REVOLUTIONS COUNTER
It indicates the number of engine revolutions per
minute expressed in miles.
ALARM LED
It comes on when the oil pressure value, or that of the
cooling temperature or of the battery voltage is incorrect
(also possible is the verifying of more anomalies
simultaneously) and it is accompanied by the flashing of
the relative wording "OIL", "H O", "BAT" appearing on the
speedometer instead of the speed value.
If it switches on, immediately stop, leave the vehicle to
cool down for a few minutes and, if necessary, check the
oil level and top-up.
If the problem persists, contact an authorised after-sales
centre as soon as possible.
1 2
GEN
INFO
2
3
4
INSTRUMENTATION AND LIGHTS
The instruments and warning lights are activated by
turning the ignition key to "ON" position.
After an initial check-up, the information corresponds
to the general conditions of the motorcycle at the
moment. The dashboard has following instruments:
INDICATOR LIGHTS 1
High beam warning light (blue)
It comes on when the upper beams are activated.
Turn direction warning light (green)
It comes on when flip the switch of turn direction.
Fuel reserve warning light (orange)
It comes on when the fuel tank contains about 5
litres of fuel; in this case refuel as soon as possible.
Neutral gear warning light (green)
It comes on when the gear is in “Neutral” position.
Injection malfunctioning warning light (orange)
It remains on when a malfunctioning of the injection
plant verifies; in this case, contact an authorised
after-sales centre as soon as possible.
a
b
c
d
e
1
b
c
a
d
e
2
3
4