Benelli 2009 TREK1130, Workshop Manual

Page: 75 / 582

ENGINE/CLUTCH DISKS
3 18
CLUTCH DISKS ADJUSTMENT
Position:
• the bike
on side trestle to avoid oil leaking.
1
2
3
4
Fasten:
• the lock nut
using special tool keeping the regulator still .
4
Install:
• the clutch lid
See “ENGINE 5.70” paragraph.
5
Special Tools: CLUTCH PRESSURE PLATE ADJUSTMENT SPANNER
Code : R180297130000
N NOTE:
To use the special tool, remove one screw with
relative cup and spring.
N NOTE:
Before adjusting the clutch disks, free the lower
clutch command of the clutch cable. Check every
10000 Km.
A
B
C
B
C
C
CHK
ADJ
A
Lock:
• the flange
Loosen:
• the lock nut
Tighten:
• the regulator
until contact with the internal reaction rod is heard
and loosen it by ¼ of a turn.
Check the clearance on the clutch command positioned
on the opposite side of the engine.
Remove:
• the clutch lid
See “ENGINE 5.69” paragraph.
3
Clutch lever clearance: 3 ~ 5 mm (0.11 ~ 0.19 in)
Clutch disengagement screw: ¼ of a turn outwards
B
C
B