Copiscan 8000 Spectrum Operator Manual
5.4.6 Changing the Menu Access Code
This menu allows you to create and save a menu access code by pressing a four-digit
sequence of F keys. This F key sequence can then be used to gain access to the full user
menu tree (if menu access is set to LIMITED) and to the menu access code menus.
NOTE:
As with the menu access menu, the current four-digit access code must be entered
before this menu is visible (i.e., you must know the existing access code in order to be
able to change it).
Scanners ship with a default access code sequence of F3 F2 F1 F3.
NOTE:
If you forget the menu access code that you defined, please call Böwe Bell + Howell
technical support at 1-800-SCAN-495, and we will provide you with a new access code.
To change the menu access code, follow the directions below:
1. At the home menu, enter the current access code.
2. Press the RIGHT arrow key to display the system setup menu.
3. Press F3 NEXT to display the change menu access code menu.
Change menu access code
START NEXT
4. Press F1 START.
Enter code:
(Press ^ to abort)
5. Enter a new 4-digit access code.
New code:
ACCEPT CANCEL
F3 F2 F3 F1
6. Press ACCEPT to finalize the access code update.
Access code updated
CONTINUE
7. Press CANCEL if you do not wish to change the access code.
CONTINUE
Access code unchanged
8. Press CONTINUE.
9. Press CLEAR to return to the home menu.
36
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
