Bell and Howell 8000 Operator'S Manual Download Page 61

Page: 61 / 96

Copiscan 8000 Spectrum Operator Manual

Activity

# Hours of Operation

Symptoms

Camera calibration

Every 500 hours

Scanner will indicate with a
blinking camera icon ( )
Poor color image quality (e.g.,
white tinted to green, red, or blue)

Table 1. Maintenance Schedule Table

6.2 Perpetual

Counters

The scanner has perpetual page and hour counters.

To review the counters, take the following steps:

1. From the home menu, press the RIGHT arrow key until you reach the COUNTER

menu.

Counters
NEXT

2. Press F3 NEXT to view total pages scanned.

Scanned:

244657

3. Press F3 NEXT to view the total hours the scanner has been on.

Hours On:

381HR 36 MIN

4. Press F3 NEXT to view total pages fed.

Pages Fed:

245681

5. Press F3 NEXT to view front lamp hours used.

Front lamp hours:
NEXT

2450

6. Press F3 NEXT to view back lamp hours used.

Back lamp hours:
NEXT

2450

7. Press CLEAR to return to the home menu.

6.3

Code Revision Numbers

The code revision menus display the hardware and software revision numbers for various
parts of the system.

To review the code revisions, take the following steps:

www.bbhscanners.com
1-800-SCAN-494 Sales

1-800-SCAN-495 Technical Support

Summary of Contents for 8000
































































































Search results

Summary of Contents for 8000

Reviews:

Related manuals for 8000

Brands by name

Popular brands

Bell and Howell 8000, Operator'S Manual

Search results

Summary of Contents for 8000

Reviews:

Related manuals for 8000

Brands by name

Popular brands