Copiscan 8000 Spectrum Operator Manual
Figure 42. Inserting the New Roller on the Roller Shaft
5. Place the new roller on the roller shaft so that the larger opening faces the gear.
6. Place the roller assemblies back in to the lower housing.
Figure 43. Replacing the Skimmer Assembly Cover Housing
7. Snap the top housing cover back onto the lower housing.
8. Replace the skimmer assembly on the scanner according to the instructions in Section
6.12,
Removing and Replacing the Skimmer Assembly
.
6.14 Replacing the Feeder Separator Roller Sleeve Assembly
The separator roller sleeve assembly is comprised of a separator roller sleeve (also
known as just the “separator roller”), a brake assembly, spacers, and retaining o-rings.
Even though the separator roller lasts up to 600,000 scans, it will wear out, which may
result in document slippage and/or multifeeding. Therefore, the rollers are considered a
consumable item and are available for purchase individually (Part #S004821) and as part
of the Spectrum All-In-One Kit (Part #S005200).
72
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
