Copiscan 8000 Spectrum Operator Manual
5.5.1.2 Print
Characteristics
Maximum Number of
Characters
22 characters
Paper Definition
Low-grade (shipper) to regular bond documents can be
used.
NOTE: Glossy paper should NOT be used, as the
ink drying time is too long for this type of paper and
smearing will result.
Document Sizes
Minimum: 4.0” x 3.5” (102 mm x 89 mm)
Maximum: 11.7” x 17.0” (297 mm x 432 mm)
Print Area
The imprinter prints 4 locations left of center, with limited
ability to “fine tune” the location: 1.38”, 3.00”, 4.25”, and
5.75” (35 mm, 76 mm, 108 mm, and 146 mm).
The imprinter prints at an adjustable distance from the
leading edge of the document. Refer to Section 5.5.1.3,
Setting the Print String from the Scanner Control Panel
in
this manual.
Fonts
Fonts are user-selectable from the scanner control panel or
the host software application. The available font types
include: Standard Normal (10 cpi), Standard Wide (5 cpi),
Large (8 cpi), and Large Wide (4 cpi).
Character Orientation
Character orientation is user-definable from the scanner
control panel or the host software application. Imprinting is
always in the vertical direction. The options are: 0
°
, 90
°
,
180
°
, and 270
°
.
Print Resolution
Horizontal: 96 dpi
Vertical: Variable based upon scanning resolution
Ink Jet Print Cartridges
The imprinter uses the Hewlett Packard “ThinkJet”, “Quiet
Jet/Quiet Jet Plus” print cartridge, HP 51604A. The box
containing the print cartridge has a date stamped on it. For
best results, install the print cartridge by that date. Each
cartridge prints approximately 250,000 standard characters.
Scanner Throughput
The imprinter has no effect on scanner throughput.
5.5.1.3
Setting the Print String from the Scanner Control Panel
The imprinter can be controlled from the scanner control panel by using the three arrow
keys and three function keys to navigate through the menu.
Ready
Auto Feed
43
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
