Copiscan 8000 Spectrum Operator Manual
2.2
Rear of Scanner
Components on the back of the scanner allow it to interface to a power source and to the
host PC, enable power-up and power-down, and help cool the scanner during operation.
The following figure illustrates the scanner’s rear panel and points out where its key
components are located.
Figure 3. Rear View of Scanner
The table below provides a legend for the above figure.
1 Diagnostic
Interface
2
Host Interface, SCSI-3 Interface
3
Air Vents
4
Power Receptacle
5
Power Switch (0 is OFF, 1 is ON)
2.2.1 Diagnostic
Interface
This is for service personnel use only except for Spectrum Color Upgrades and 8000 Plus
Productivity Upgrades (
see
www.bbhscanners.com
for details
).
2.2.2 Host
Interface
Your scanner has a SCSI-3 High Density 68 pin female connector.
The host connectivity kit that includes the SCSI cable and the Kofax 650i SCSI adapter
board allows the scanner to receive commands from the host. The host also receives
document images from the scanner.
2.2.3 Air
Vents
These vents allow air to circulate through the scanner to cool the internal components.
8
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
