Copiscan 8000 Spectrum Operator Manual
2.1.1 Feeder
When you wish to scan, place the stack of documents (or a single document) you want to
scan on the scanner’s feeder. The feeder is made of stainless steel and plastic and
protrudes at a slight angle from the front of the scanner. When the scanner receives a scan
command from the application software running on your PC, the scanner takes one
document at time from the stack into its transport system. The feeder has two adjustable
guides that keep the documents in an orderly stack, thereby preventing them from
entering the scanner at an angle, which could cause paper jams or multifeeds.
2.1.2 Exit
Tray
The exit tray is the plastic tray located on the top front of the scanner where documents
exiting the transport system are stacked in the order in which they were fed. The exit tray
is adjustable, and it can be placed in different positions, depending on what size of
documents you are scanning.
2.1.3 Opening
Handle
The scanner can be opened to access the occasional paper jam or for transport
maintenance. To open the transport, disengage the latch by pulling the opening handle
towards you with your right hand. The scanner will not operate with the transport open.
CAUTION:
If the scanner appears to be closed, but does not feed, the latching mechanism might
not be firmly engaged. Please ensure that the scanner is closed by firmly pushing down
on the scanner, but take care not to slam it shut.
2.1.4 Side Access Panel
The side access panel is located on the left side of the scanner. It allows access for
replacing lamps and maintenance of the scanner. The side access panel is held shut by a
magnetic latch and can only be opened when the transport is opened. The scanner will
not operate with the side access panel open.
2.1.5 Operator
Controls
The control panel is located on the front of the scanner. It contains 13 keys and an LCD
display. The keys perform the following functions:
•
Stop scanning; immediate stop
•
Carry out scanner diagnostics and calibration
•
Select scanning options
•
Clear errors
The LCD display lets you monitor the scanner’s operational status and navigate its
functional menus.
7
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
