2022.3-0000010 OM
160
3.23.5 Rear screen
The rear screen is open-type, which is hinged to the cabin frame. The rear screen in
a closed position is secured by a lock 1 (figure 3.23.9), in an opened position it is secured
by two pneumatic lifts.
For rear screen position adjustment the following shall be done:
- take off a cap 3 (figure 3.23.8);
- loosen a nut 4;
- turning an eccentric bushing 1 find necessary position of the screen (between the
rear glass contour and the screen aperture contour a minimum positive clearance shall
make 2 mm), tighten the nut 4, put the cap 3.
- adjust the position of a lock 1 (figure 3.23.9), taking off a cover 2, loosening bolts
3, then moving the lock in horizontal plane (in axial and cross directions) achieve an opti-
mal position relative to a pin 4, tighten the bolts 3, put the cover 2.
1 – eccentric bushing; 2 – rear upper cross member; 3 – cap; 4 – nut.
Figure 3.23.8 – Rear screen adjustment
1 – lock; 2 – cover; 3 – bolt; 4 – pin; 5 – rear screen.
Figure 3.23.9 – Rear screen fixation
https://tractormanualz.com/
