2022.3-0000010 OM
51
1, 2, 3 – handles to control HLL valve group sections; 4 – instruction shield
with diagram of HLL valve group section control.
Figure 2.16.2 – HLL valve group section control
Instruction shield with a diagram of HLL valve group outlets connection to outer
consumers is attached to the tractor valve group as per figure 2.16.3. The valve group out-
lets are equipped with fast couplings with color protective covers: red – uplift, green – low-
ering.
Figure 2.16.3 – Diagram of HLL valve group outlets connection to outer consumers
2.17 Cutout fuses
2.17.1 General information
Cutout fuses are intended for protection of electrical lines against overloads and
short circuit.
WARNING: TO AVOID BURNING OF TRACTOR WIRING NEVER USE FUSES
WITH CURRENT RATING HIGHER THAN RATING SPECIFIED IN THIS SECTION. IF A
FUSE OFTEN BURNS OUT, FIND OUT THE CAUSE AND ELIMINATE THE FAULT!
https://tractormanualz.com/
