2022.3-0000010 OM
198
5.4.2 Drawbar hitch DH-2V
Figure 5.4.1 – Installation variants scheme of DH-2V
Table 5.3 – Basic parameters and coupling dimensions of DH-2V
Standard size (configuration)
DH-2V (Towing yoke)
1 Variant
Yoke acc. to ISO Yoke acc. to GOST
2 Mounting location
Rear lifting device
3 Design features
Nonrotational, hight adjustable
4 Purpose
For connection and coupling of trailed,
semitrailed implements with traveling
wheels including of tractor semitrailer
type
40
85
5 DH yoke dimensions, mm:
) connecting pin diameter
b) yoke gap height
c) yoke gap width
70
d) yoke position
1)
for the implements driven by
rear PTO shaft
Lowermost position
e) distance between PTO shaft end extension
and connection pin axis, mm
110
160
6 Trailing appliance for connection to DH:
) type
Rigid, with tractor drawbar clevis
b) vertical load in hitch point, kN, not more than
25
c) trailing appliance steering angle in horizontal
plane, degrees, not less than
±60
d) protective mean type
Safety chain (rope)
2)
e) connection point of protective mean to the
tractor
Lifting device bore
_________________________________________________________________________________________________
1)
Recommended.
2)
Implement accessories.
ATTENTION: IT IS FORBIDDEN TO PUT DH-2V YOKE TO A POSITION WHERE
ITS BODY OVERHANGS THE DH SUPPORTING BRACKET END FOR MORE THAN 15
!
https://tractormanualz.com/
