Programming manual SCU-series
HB-37500-820-10-12F-EN SCU Programming manual
Page 69 of 252
Status: 19.03.2021
NOTICE:
Due to the ressources involved, and because of their adminsitration in the programme
environment, is not recommendable to change the type of equipment later on.
The following Properties window can be used for every input cluster to assign a name and to select
the parameter “
Cycle time
”
.
In the “
Cycle time
“
setting, it is possible to select among16 ms, 24 ms and 32 ms.
Figure 44 Property window of the device
2. Fixing the peripheral devices in the connection dagram
Under “Terminal scheme“
a simplified scheme with selected devices, encoders, inputs and outputs
of the SCU-system is shown. The necessary modules are linked automatically after they have
been inserted.
The following process is recommended:
1. Select the corresponding type of peripheral devices in the browser tree.
2. Select a module from the library.
3. In case of modules with the monitoring of speed and positon, the definition of
encoders and their parameters is necessary.
NOTICE:
A red symbol indicates a missing setting
