Programming manual SCU-series
HB-37500-820-10-12F-EN SCU Programming manual
Page 163 of 252
Status: 19.03.2021
Parameter
Description
Value
Encoder type
Display encoder type
No input possible
Process encoder
Not supported.
Info only.
Axle type
Axle range
Finite modules
Scaling type
Linear or rotatory setting
Linear
Rotatoriy
Rotatory
Unit
Linear-> mm/s
Linear-> m/s
Rotatory -> degrees/s
Rotatory-> r/s
Direction of Rotation
Direction of rotation
Clockwise
Counter Clockwise
Motor Shaft rev.
Transmission ratio drive meter
Driving Shaft rev.
Transmission ratio gear denominator
Feed constant
Ratio distance / encoder revolution - meter
Driving Shaft rev.
Ration distance / encoder revolution
denominator
Negative Position Limit
Minimum measuring length
Positive Positions Limit
Maximum measuring length
Maximum speed
Max. speed range
Switch-off threshold Position
Not used because of SafetyEncoder
Switch-off threshold speed t
Not used because of Safety Encoder
Max. acceleration
Max. acceleration application