manualshive.com logo in svg

BBH SCU Series, Programming Manual

The BBH SCU Series Programming Manual is your comprehensive guide to understanding and utilizing the product's advanced features. This user-friendly manual is available for free download on manualshive.com, offering step-by-step instructions and valuable insights that enhance your experience with the BBH SCU Series.

Share
Download
background image

Programming manual SCU-series 

 

 

 

 

 

HB-37500-820-10-12F-EN SCU Programming manual 

 

Page 105 of 252 

Status: 19.03.2021 

 

Collection / Stop: 

starts or stops the recording.

 

 
Pause: 

 

Press the “Pause“

 button to stop the displayed values in the main diagram. The data are 

still available in the cache. 

 
Reset: 

reset of diagram values and process data. 

 
Tip:

 With a double click in the main diagram window, the cursor is inserted at this position. Thus, 

the cursor is added in the value table for optional measurements.  
 
Hold on change: 

If the “

Hold on change

“

 button isactive, the recording stops 2 seconds after a 

slope change of the respective output (see above). This function allows longi-time recording and 
error analysis in the absence of the operator.

 

 
Save: If the range has been stopped, the current recording can be saved in afile. In the file, the 
range data are written as ASCII values. The índividual values have XML tags, so that the recording 
can be used for documentation purposes or for the analysis connected to encoder configuration. 
The data can also be shown with the Microsoft Explorer or with another XML viewer. 
 
Load: With this control surface, a measurement saved under the range function of an XML file can 
be loaded in the range. In this case, the range window changes to the view mode. Due to possible 
differerences in encoder configuration of the displayed measurement for the current programme, 
and the resulting deviances in the scaling of the position values and of the speed values, the 

“Start” button and the plan

 selection list are deenabled after the data have been loaded for display. 

The measurements remain deenabled, until the range function is restarted. 
 
Import: Import of a measurement from .ScpXml files. 
 
Export: Export of the measurement of a selected output to an .ScpXml filei.  
 

 

Figure 85 Selecting an output for export 

 

 

Summary of Contents for SCU Series





























































































































































































































































Reviews:

No comments

Related manuals for SCU Series

OmarLift C40 Instruction Manual preview
C40
Brand: OmarLift Pages: 14
Wavetec Spectra Installation Manual preview
Spectra
Brand: Wavetec Pages: 17
Calsense ET1 Manual To Programming preview
ET1
Brand: Calsense Pages: 9
MaestroHome Smart Controller Quick Setup Manual preview
Smart Controller
Brand: MaestroHome Pages: 10
UniKey SR3 Installation Manual & User Manual preview
SR3
Brand: UniKey Pages: 20
Rain Bird ESP-LXD Installation, Programming & Operation Manual preview
ESP-LXD
Brand: Rain Bird Pages: 138
Rane ZR1 Datasheet preview
ZR1
Brand: Rane Pages: 2
L-Acoustics LA8 Product Information preview
LA8
Brand: L-Acoustics Pages: 20
Patron TOM 5 Information For Use preview
TOM 5
Brand: Patron Pages: 36
Parker EP Series Pro-Bloc Installation And Operation Manual preview
EP Series Pro-Bloc
Brand: Parker Pages: 11
Parker MT-700 Series Installer'S Manual preview
MT-700 Series
Brand: Parker Pages: 22
Parker HASV08R Quick Start Manual preview
HASV08R
Brand: Parker Pages: 2
Tylo 2900 5208 Installation Manual And Quick Start Manual preview
2900 5208
Brand: Tylo Pages: 51
Sonos Controller CR100 Brochure & Specs preview
Controller CR100
Brand: Sonos Pages: 2
Watts WFHC 06Z 02 HC RF 24 User Manual preview
WFHC 06Z 02 HC RF 24
Brand: Watts Pages: 18
Waters Bus SAT/IN Installation Manual preview
Bus SAT/IN
Brand: Waters Pages: 39
Dahua Technology DHI-IPMECD-3021 Series User Manual preview
DHI-IPMECD-3021 Series
Brand: Dahua Technology Pages: 28
Texas Instruments Errata MSP430F6779 Manual preview
Errata MSP430F6779
Brand: Texas Instruments Pages: 27

Brands by name

Popular brands

Load more brands