manualshive.com logo in svg

BBH SCU Series, Programming Manual

The BBH SCU Series Programming Manual is your comprehensive guide to understanding and utilizing the product's advanced features. This user-friendly manual is available for free download on manualshive.com, offering step-by-step instructions and valuable insights that enhance your experience with the BBH SCU Series.

Share
Download
background image

Programming manual SCU-series 

 

 

 

 

 

HB-37500-820-10-12F-EN SCU Programming manual 

 

Page 106 of 252 

Status: 19.03.2021 

 

4.6.12.1.  Procedure of a measuring in the range 

After the 

range window has been opened, it still stands on “Stop“

, i.e., no cyclical process data 

from the SCU system are read. To carry out a measurement that is faultless to the greatest extent, 
you should proceed as described below.  
 

NOTICE: 

All Internet based and all LAN based programs running in the background should be closed before 
the measuring. 
 

4.6.12.2.  Preparing measurement 

Select the desired measuring plan. During a speed-oriented measurement, the running 
control-time of the SCU module is shown on the X-axis. The running control-time is a continuously 
rising meter for the system control signs of the SCU module. The measurement data are constantly 
updated and are stored in the cache. The recoring memory is aprox. 15 minutes. 
Measurement automatically stops when the cache is full. The preceding measurement is 
automatically saved as 

“ScopeTempData.ScpXml“.

 

During position-oriented measurement, the configured measuring range of the set axis is shown on 
the X-axis. 
 

NOTICE: 

 When the plan is changed, recorded data from the preceding measurements get lost. When the 
window size is changed, the displayed data must be newly scaled. This requires position-oriented 
measurement and the reset of the data buffer (SSX). 
 

4.6.12.3.  Starting measurement 

The button “Erfassung“

 [Capture] to start measurement is only available with an active connection 

to the SCU system. After this button has been clicked on, the data are transferred cyclically into the 
cache, and are shown in the diagram from left to right. An active recording can be stopped with the 

“

Stopp

” [Stop] button.

  

4.6.12.4.  Stopping measurement and indicating data 

After measurement is finished, the data can be analysed by appropriately moving the shifting bar. 
 

 

Summary of Contents for SCU Series





























































































































































































































































Reviews:

No comments

Related manuals for SCU Series

Samsung SolarCell Remote Operating Instructions preview
SolarCell Remote
Brand: Samsung Pages: 2
Nedap WIM Installation Manual preview
WIM
Brand: Nedap Pages: 20
Radware Alteon Installation And Maintenance Manual preview
Alteon
Brand: Radware Pages: 98
RabbitCore RCM2200 Getting Started Manual preview
RCM2200
Brand: RabbitCore Pages: 34
R82 High-low Mounting Instruction preview
High-low
Brand: R82 Pages: 11
Parker EP Series Pro-Bloc Installation And Operation Manual preview
EP Series Pro-Bloc
Brand: Parker Pages: 11
Parker MT-700 Series Installer'S Manual preview
MT-700 Series
Brand: Parker Pages: 22
Parker HASV08R Quick Start Manual preview
HASV08R
Brand: Parker Pages: 2
Watlow DIN-A-MITE C User Manual preview
DIN-A-MITE C
Brand: Watlow Pages: 20
IBA ibaMS16-DI-220V Series Manual preview
ibaMS16-DI-220V Series
Brand: IBA Pages: 32
SAGEMCOM DIW377 ALT US Manual preview
DIW377 ALT US
Brand: SAGEMCOM Pages: 2
Instant Care IC2020TX Manual preview
IC2020TX
Brand: Instant Care Pages: 2
Rollei Soluna Remote Control Instruction Manual preview
Soluna Remote Control
Brand: Rollei Pages: 8
TSM DOUBLER2 Instructions For Installing preview
DOUBLER2
Brand: TSM Pages: 2
HEIDENHAIN LIP 471R Mounting Instructions preview
LIP 471R
Brand: HEIDENHAIN Pages: 32
M-system R7M-SV4-R Instruction Manual preview
R7M-SV4-R
Brand: M-system Pages: 7
D+H DDS 54/500 Original Instructions Manual preview
DDS 54/500
Brand: D+H Pages: 12
DUCH CAM888 User Manual preview
CAM888
Brand: DUCH Pages: 9

Brands by name

Popular brands

Load more brands